Carpet Steam and Dry cleaning in Perth Nedlands: Your carpets add elegance and personality to your house. And, periodical cleaning is essential for longevity of your carpets. But, which cleaning method is better, dry cleaning or steam cleaning? Let us find out?

Why do carpets discolour?

Every day, different rooms in your house and your family pets add to the buildup of grease. This buildup comes from the outside and eventually dries on your carpet. Eventually, this residue left on your carpet can attract and trap dirt in the carpet fibres.

As time goes by, dirt can build up on your carpet and make it change colour. This change can be easily seen. Also, if you don’t do anything about it, this dirt can get worse and become harder to clean. This makes the carpet look even worse. And this is where carpet steam and dry cleaning in Perth and Nedland come in handy for you.

How do professionals clean your carpets?

When you’re dealing with dirty carpets, it’s really important to keep in mind that there isn’t just one way to clean them that works for everyone. Every carpet is different and needs a specific method to make it clean and fresh again. Perhaps you’re facing some tough stains that won’t budge, dirt that’s deeply ingrained, or simply the effects of regular use. It’s super important to know that having a personalised cleaning plan is really important.

Before the professionals start, they will carefully check your dirty carpets to see how dirty they are, if there are any stains, and any other problems that need to be fixed. This inspection is super important because it helps the experts see how your carpets are doing and decide what to do next.

What is steam cleaning?

Steam cleaning is also called, hit water extraction method. The method involves high pressure jet sprays shooting hot water deep into the carpets. Then the water is methodically vacuumed out. Before they start the steam cleaning process, your steam cleaning technician will;

  • Remove surface dirt
  • Spot treat stains with a cleaning agent
  • And, soften the surfaces with a pre-spray

The pre-spray allows hot water to penetrate deep into the fibres.

Drying time after hot water extraction can vary. But, if there is adequate ventilation, it should not take longer than 8 hours.

Carpet steam and dry cleaning in Perth and Nedlands: What is carpet dry cleaning method?

There are several carpet dry cleaning methods. Some methods use water (much less than in steam cleaning). But, the dry powder cleaning method hardly uses any water at all.

But, the most popular dry cleaning method is called bonnet cleaning.

What is the bonnet cleaning method?

Well, to be honest this method still requires some water usage. But, this method requires much less water than for steam cleaning. The first step in carpet dry cleaning is a good old vacuuming to get rid of surface dirt. Then the cleaners apply a dry cleaning solution. This solution breaks down the fibres of your carpet, releasing dirt and grime in the process. They use a rotary scrubber with rotating pads to absorb dirt. The pads are made of absorbent cotton, soaked in a mixture of hot water and conditioning solution. They keep replacing pads throughout the cleaning process.

What is the difference between carpet steam cleaning and dry cleaning?

Dry cleaning is quick and effective. But, steam cleaning removes deeply embedded dirt. The down side of steam cleaning is that the carpets take longer to dry.

We recommend that you use a dry cleaning method for general maintenance. And, go for steam cleaning when you want to do a deep clean.